9301E|Extra Heavy-Duty Slide|Accuride International9301E|Extra Heavy-Duty Slide|Accuride International

The Accuride 9301E is an extra heavy-duty, Non-Disconnect slide with full-extension that can handle up to 600 lbs., perfect for large utility, emergency, and recreational vehicles.

9301EHeavy-Duty & Full Extension Drawer Slide (Non-Disconnect)

Recently enhanced with increased load capacity and shock-absorbing ball bearing space bumpers that reduce impact noise, the 9301E model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs.
  • Supports loads up to 600 lbs.
  • For drawers up to 42” wide with slide lengths up to 60"
  • 9301E accessory bracket kits offer bottom and side mount installation options
  • For additional technical information see below
Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting a high bar in quality and durability for competing slides in its weight class.
Show more

$83.72

This is a required field.
Pair
  • Limited Lifetime Warranty
  • Contact
  • Shipping Policy
  • Configuration: Side- or Flat-Mount
  • Max Drawer Load: 600 lbs.*
  • Max Drawer Width: 42 in.
  • Level of Travel: Full Extension
  • Side-Space: 3/4 in.
  • Method of Disconnect: Non-Disconnect
  • Available Finish: Clear Zinc (C)
  • Available Lengths: 10", 12", 14", 16", 18", 20", 22", 24", 26", 28", 30", 32", 34", 36", 40", 42", 44", 48", 54" and 60"
  • Max Load lowered to 180 lbs. when flat-mounted
  • WARNING: California Proposition 65
  • Flat mount: 180 lbs., drawer widths up to 32"
  • Mobile applications: 360 lbs., drawer widths up to 32"
  • Frequent usage: 480 lbs., drawer widths up to 42"
  • Moderate usage: 600 lbs., drawer widths up to 24"
  • Bracket-mounted: 420 lbs., drawer widths up to 42"
  • Bracket-mounted: 600 lbs., drawer widths up to 22"
  • For additional load ratings, consult the technical sheet
  • Bridged ball spacers minimize side-to-side movement, help increased the load rating up 20%, improve full-extension and over-travel reliability, and produce smoother and more consistent movement
  • Added shock absorbing ball spacer bumpers help reduce the end stop and lower the impact noise
  • 13% increase in inner and outer member thickness contributes to 20% increased payload
  • Optional platform bracket kit allows for additional bottom- and side-mount applications
  • Model 9301E may be installed as a companion slide with Model 9308E (lock-in and lock-out, actuated with a front lever). Special packaging is available for this combination, which includes one standard 9301E and one right-hand 9308E. Supports 60” wide drawers with slide lengths up to 36”. The part number for this packaging is 9308-5. This D-pack offering is available in the following lengths: 14"-32", 36", 40", 48", 54” and 60."
accuride

You're reviewing:

Heavy-Duty & Full Extension Drawer Slide (Non-Disconnect)

You may Also Like